Sri Lanka's Leading Waterproofing Service Provider | Waterproofing.lk
- Powred by Hi-Tech Concrete Solutions (Pvt) Ltd
- Powred by Hi-Tech Concrete Solutions (Pvt) Ltd
Sri Lanka's Leading Waterproofing Service Provider | Waterproofing.lk
High Quality
Grouts and mortars for waterproofing are specialized formulations designed to seal joints, fill gaps, and provide structural integrity while preventing water infiltration. These products are commonly used in tile installations, masonry work, and concrete repairs where moisture resistance is crucial. Waterproof grouts are used to fill the spaces between tiles, ensuring a watertight seal
Epoxy Based, 3 Component, Solvent-free, Repairing and Filling Mortar Cum Adhesive. Epoxy resin compound and specially blended quartz sand other fillers are formulated for the repair of faulty concrete, curing taken place even at low temperature and humidity.
Epifix-L20 is a two-component, ultra-low viscosity free flowing epoxy system, without solvents, offering very strong adhesion to concrete and steel, as well as high compressive and flexural strength, even when applied on damp substrates.\ It is classified as a product for concrete injection, according to EN 1504-5.
Epifix-L10 is a two-component, ultra-low viscosity free flowing epoxy system, without solvents, offering very strong adhesion to concrete and steel, as well as high compressive and flexural strength, even when applied on damp substrates. It complies with the requirements of ASTM C 881-90, Type I, Grade 1, Class B+C.
Conmex NS-10 is a powdered admixture formulated to produce a more uniform and workable non-shrink grout with less water. As a non- shrink additive, this will allow slow, controlled, in-place expansion of the grout mix prior to hardening. As a grout fluidifier, it will greatly enhance flowability, allowing ease of placement with extended handling and set times. It also significantly reduces water requirements by 10 to 15%.
This is a solvent-free, moisture tolerant, thixotropic, structural two part adhesive and repair mortar, based on epoxy resins and special fillers.
3-component, high-strength, flowable, non-shrink epoxy grout. For bedding and anchoring applications, such as machinery bases, baseplates, stanchion plates, etc. Also used as a pourable mortar for repair of damaged concrete elements. Provides high early and final strength, excellent bonding to steel and concrete and high resistance to impact and vibration.
This is specially formulated to produce a shrinkage compensating fluid micro concrete with high performance. It can be applied in thickness ranging from 50 mm to 300 mm per layer although greater thickness up to 500 mm can be practiced depending on the design of the repair job and the level of steel reinforcement.
High-strength, fiber-reinforced, cementitious repair mortar. Suitable for high-strength repairs to concrete. Easy-to-use by hand (trowel) or machine application.
High-strength, flowable, non-shrink, precision cementitious grout. Designed for grouting and precision bearing operations, such as machinery bases, baseplates, steel frames, for anchoring bolts, etc. Compressive strength is more than 80MPa..
High-strength, flowable, non-shrink, precision cementitious grout. Designed for grouting and precision bearing operations, such as machinery bases, baseplates, steel frames, for anchoring bolts, etc.